Jump to content

Photo

LED style Numberplate Units - Will these work/fit?

- - - - -

  • Please log in to reply
19 replies to this topic

#1
MB RS3

MB RS3

    Member

  • Valued Member
  • PipPip
  • 156 posts
  • LocationKent

Looking at getting some OEM style LED rear Numberplate Units for the 8P

 

Will these fit/work? Guessing they might need some coding too. 

 

Thanks. 

Attached Files



#2
RS3Dell

RS3Dell

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 4,820 posts
  • LocationToo close to Roy.

Looking at getting some OEM style LED rear Numberplate Units for the 8P
 
Will these fit/work? Guessing they might need some coding too. 
 
Thanks. 


I have them fitted to mine.😁

I just recoded using vcds 👍

Dell.

#3
T-800

T-800

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 11,962 posts

Looking at getting some OEM style LED rear Numberplate Units for the 8P

Will these fit/work? Guessing they might need some coding too.

Thanks.


I bought and fitted the A5 oem ones when I had mine.

Tried the ‘trups’ em tuning ones but they kept ‘blowing’

Oh and yes a coding Change required.

#4
Redadair13

Redadair13

    Member

  • Valued Member
  • PipPip
  • 67 posts
A5 oem ones fitted too, bought some off ebay first, but kept throwing up a bulb check light.

#5
MB RS3

MB RS3

    Member

  • Valued Member
  • PipPip
  • 156 posts
  • LocationKent

I have them fitted to mine.

I just recoded using vcds

Dell.

 

Nice, what VCDS coding did you use Dell? 

 

Thanks. 



#6
T-800

T-800

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 11,962 posts
09 central electrics

Byte 17 tick bit 07 license plate w/o pulse width modulation led

Byte 23 untick bit 06 lamp monitoring cold license plates active

#7
RS3Dell

RS3Dell

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 4,820 posts
  • LocationToo close to Roy.

Nice, what VCDS coding did you use Dell? 
 
Thanks. 


I coded it sometime ago but i think you go into central electric then adaptions & tick box for rear led number plate lights.

But if Sean or anyone else can confirm please do.

Dell.

#8
RS3Dell

RS3Dell

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 4,820 posts
  • LocationToo close to Roy.
Hope this is of help mate.

Attached File  Screenshot_20190801-203605_Samsung Internet.jpg   30.95K   14 downloads

Dell.

#9
JayRS3

JayRS3

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 2,767 posts
  • LocationKent
A5 ones here too

#10
MB RS3

MB RS3

    Member

  • Valued Member
  • PipPip
  • 156 posts
  • LocationKent

Cheers appreciate that Dell and T-800



#11
MB RS3

MB RS3

    Member

  • Valued Member
  • PipPip
  • 156 posts
  • LocationKent

I bought and fitted the A5 oem ones when I had mine.

Tried the ‘trups’ em tuning ones but they kept ‘blowing’

Oh and yes a coding Change required.

 Interesting you mention Trups - did you fit his Interior LED Light Pack too? 



#12
JayRS3

JayRS3

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 2,767 posts
  • LocationKent
Interior pack here many moons ago on my S3 and transferred over to my RS. Still going strong.

#13
RS3Dell

RS3Dell

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 4,820 posts
  • LocationToo close to Roy.

Interior pack here many moons ago on my S3 and transferred over to my RS. Still going strong.


After seeing Jays EM Tuning led.lighting pack i bought likewise

Dell.

#14
T-800

T-800

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 11,962 posts

Interesting you mention Trups - did you fit his Interior LED Light Pack too?

Yes and they were fine.

The number plate bulbs tho not so.

It’s why I bought the A5 ones in the end.

#15
Arkious

Arkious

    Member

  • Valued Member
  • PipPip
  • 222 posts
  • LocationSouth Shields, North East
On your A5 licence plate LEDs, do both LEDs come on yours as only 1 on each side has ever came on for me on both my A3 and RS3?

#16
RS3Dell

RS3Dell

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 4,820 posts
  • LocationToo close to Roy.

On your A5 licence plate LEDs, do both LEDs come on yours as only 1 on each side has ever came on for me on both my A3 and RS3?


Both off mine work fine but i think they have different part No's so if you bought 2 the same one my not work as there leds & may be polarity conscious.

Dell.

#17
RobRS

RobRS

    Valued Club Member

  • Valued Member
  • PipPipPip
  • 858 posts
  • LocationSurrey

On your A5 licence plate LEDs, do both LEDs come on yours as only 1 on each side has ever came on for me on both my A3 and RS3?

 

have you applied the following settings in VCDS -
 

Attached File  Number Plate LED.jpg   48.71K   12 downloads


MY17 Panther Black RS 7 Performance | Black Pack | Carbon Interior | 21" DS black wheels fitted with MPS4's tyres  | Dynamic Pack Audi Connect Advanced Key + boot opening |  Audi phone box with wireless charging  | Audi smartphone interface |  Dynamic Mirror Indicators Parking pack | Feature programming changes EM Tuning interior LED light update | Thinkware F800 pro + Rear Dash Cam |

 
Wife: MY12 Daytona Grey RS3 | Bucket seats with grey stitching | Heated seats | Black Styling Pack & Inlays | Black Roof Bars | Privacy glass | RNS-E | Bose sound system | Reversing Sensors | Audi LED number plate lights | EM Tuning LED interior light pack | Cruise Control | Folding, dimming & heated mirrors | Auto Lights & Wipers | Adaptive headlights | Gloss Black Alloys fitted with MPS4's tyres | Thinkware F750 + Rear Dash Cam |


#18
Arkious

Arkious

    Member

  • Valued Member
  • PipPip
  • 222 posts
  • LocationSouth Shields, North East
I will check the part numbers Dell, it was a long time ago when I got them.

As for the settings, I know I turned the monitoring off but will check the other to be sure! Cheers :)

#19
Arkious

Arkious

    Member

  • Valued Member
  • PipPip
  • 222 posts
  • LocationSouth Shields, North East
Checked the settings and they are fine, checked the part numbers and they too are correct. I was going to try putting them in the opposite sides but they don’t fit anyways. Maybe they are just busted?

#20
JayRS3

JayRS3

    Elite Club Member

  • Valued Member
  • PipPipPipPip
  • 2,767 posts
  • LocationKent

Checked the settings and they are fine, checked the part numbers and they too are correct. I was going to try putting them in the opposite sides but they don’t fit anyways. Maybe they are just busted?

2 year warranty of genuine parts




Audi RS3OC Forum is Powered by APR Motorsports UK
© 2013-2014 Audi RS3 Owners Club | All rights reserved | This club and forum is not officially associated with AUDI AG.