[RS3Dell]

I spoke to well experienced mechanic. Piston 1 and 3 can be an issue if the wrong oil is used. Also as a precaution for us all we need to use a stronger coolant like water wetter and motul inulgel. If the engine is cool these piston rings wont give in and also after a hard drive, cruise for a bit then park the car off.

Sent from my SM-G935F using Tapatalk

 

Our car have a run on pump & cooling fan for after you switch off the engine if its too hot but letting the turbo spool down is always a good practice.

 

As for using oil additives i don't think they make up for using a good quality recommended grade of engine oil.

 

Dell.

[ily.r]

Our car have a run on pump & cooling fan for after you switch off the engine if its too hot but letting the turbo spool down is always a good practice.

As for using oil additives i don't think they make up for using a good quality recommended grade of engine oil.

Dell.

Ceratec is good. Ceramic technology. Ive notice a significant drop in oil temps. Around 10degrees celcius.

Sent from my SM-G935F using Tapatalk

[RS3Dell]

Ceratec is good. Ceramic technology. Ive notice a significant drop in oil temps. Around 10degrees celcius.

Sent from my SM-G935F using Tapatalk

 

What temp does you oil run at ?

 

Dell.

[ily.r]

What temp does you oil run at ?

Dell.

95-101 degrees celcius. I havent seen higher than that.

Sent from my SM-G935F using Tapatalk

[RS3Dell]

95-101 degrees celcius. I havent seen higher than that.

Sent from my SM-G935F using Tapatalk

 

Ditto but that temp isn't a problem to be fair mate & my car is remapped ! 

 

Dell.

Edited by RS3Dell, 09 September 2017 - 07:31 PM.

[ily.r]

Ditto but that temp isn't a problem to be fair mate & my car is remapped !

Dell.

Thats good. Im at ease at least.

Sent from my SM-G935F using Tapatalk

[RS3Dell]

Thats good. Im at ease at least.

Sent from my SM-G935F using Tapatalk

 

As our cars use an water 2 oil intercooler the hotter one will heat the other so your never get the oil below water temp once the engine is fully warmed up !

 

Dell.

Edited by RS3Dell, 09 September 2017 - 07:49 PM.

[The_Bear]

My cars oil sits between 99-106°C is this a normal running temp range?

[RS3Dell]

My cars oil sits between 99-106°C is this a normal running temp range?

 

Yes mine runs in that range mate.

 

Dell.

[Jacques_RS3]

Hi Guys so my car is fixed, new block,pistons, bearings,conrods so basically new bottom end.

Also new cam chain fitted. Now quick question what is the run in procedure now.

[ily.r]

Hi Guys so my car is fixed, new block,pistons, bearings,conrods so basically new bottom end.

Also new cam chain fitted. Now quick question what is the run in procedure now.

Well done bud. Many happy kms.

Sent from my SM-G935F using Tapatalk