Big turbo conversion
#1
Posted 01 July 2016 - 07:32 PM
This will be the specification:-
Rebore to 2.6 with new pistons and rods
Complete new valve train with titanium retainers
Arp hardware
Schrick cams
Garret GTx3582 with htz compressor wheel and tail .82 housing
Ported head
Custom exhaust manifold with external wastegate
Hperformance intercooler
Engine out
#2
Posted 01 July 2016 - 07:36 PM
#3
Posted 01 July 2016 - 07:37 PM
#4
Posted 01 July 2016 - 07:37 PM
#5
Posted 01 July 2016 - 07:38 PM
#6
Posted 01 July 2016 - 07:41 PM
Oz superturismo 20x8.5 wheels
Vw racing suspension
Vw racing drop links
034 rear arb
8pot calipers with AP racing discs
Hperformance 90mm intake
Autotech fuel pump
Forge intercooler - sold
Tte 500 turbo - forsale
Foam panel filter
Secondary cold air feed
Carbon intake scoop
Full 3.5" exhaust system without cats and valve
Forge bov
Edited by R7jay, 01 July 2016 - 07:43 PM.
#7
Posted 01 July 2016 - 08:26 PM
#8
Posted 01 July 2016 - 08:40 PM
#9
Posted 01 July 2016 - 08:45 PM
#10
Posted 01 July 2016 - 08:49 PM
#11
Posted 01 July 2016 - 10:37 PM
RS3 8P - Daytona Grey - Stage 2+ - 430hp - DSG Map - Turbo Back Milltek Exhaust - Wagner v3 Intercooler - 034 Motorsport Intake - 034 Motorsport ARB - 034 Motorsport Dogbone insert - 034 Motorsport Top Mounts - Bilstein B14 Coilovers
#12
Posted 02 July 2016 - 06:34 AM
Nice build Jay!!!
Cant wait to see your results mate.
RS3 8P MRC Stage 3 map/DSG Stage 2 map
Forged Engine/Schrik Cams/ TTE500/Full Milly/034 Air Intake with cold air feed/Forge Intercooler/Aquamist water/meth kit.
#13
Posted 02 July 2016 - 04:04 PM
Current modifications :-
Oz superturismo 20x8.5 wheels
Vw racing suspension
Vw racing drop links
034 rear arb
8pot calipers with AP racing discs
Hperformance 90mm intake
Autotech fuel pump
Forge intercooler - sold
Tte 500 turbo - forsale
Foam panel filter
Secondary cold air feed
Carbon intake scoop
Full 3.5" exhaust system without cats and valve
Forge bov
#14
Posted 02 July 2016 - 04:06 PM
#15
Posted 02 July 2016 - 07:14 PM
Wheels fit fine no rubbing few small mods required
#16
Posted 02 July 2016 - 07:15 PM
#17
Posted 03 July 2016 - 04:23 PM
#18
Posted 06 July 2016 - 05:13 PM
#19
Posted 06 July 2016 - 05:22 PM
Pump lobe allowing more fuel pressure, very light head skim, rebore bottom end with decking.
Super finish cams, balance crank and also super finish. New race bearings, arp bolts, using a tried and tested porting technique by Tim, it will basically gain 50-60bhp and allow 500-600rpm quicker turbo spool. Full engine assembley with blue printing.
#20
Posted 06 July 2016 - 07:55 PM
Look forward to seeing this. I had 750-800ish in my GTR and it was complete mental. I cant imagine how the RS3 will feel other than scary lol
I see no uprated Cardan shaft, will it handle the power?? What about the box and clutches, anything getting uprated??
BMW X3MC
2019 RS3 Saloon Sold