[JayRS3]

Yes definitely, gonna have a go the weekend u have any tips on how u did yours. Lol

Mine wasn’t too bad so I’m guessing each car is different, worst case just remove the door card. Easy enough to do.

[Hall1979]

Mine wasn’t too bad so I’m guessing each car is different, worst case just remove the door card. Easy enough to do.

Yep cool cheers dude 👍

[RS3Dell]

Yes definitely, gonna have a go the weekend u have any tips on how u did yours. Lol

 

They are a pig   Just don't force them & take your time mate 

 

Dell.

[Hall1979]

They are a pig Just don't force them & take your time mate

Dell.

Will do bud, cheers

[RS3Dell]

Guessing u can do the rears as well.

Cheers

 

The rears just fall out as the loom is much longer 90sec job mate 

 

Dell.

[Hall1979]

The rears just fall out as the loom is much longer 90sec job mate

Dell.

👍

[Wrekka]

Yeah fronts have no slack on the wiring loom (well on mine anyway). So a 5 min job becomes remove door card etc!

[Hall1979]

Yeah fronts have no slack on the wiring loom (well on mine anyway). So a 5 min job becomes remove door card etc!

Yes thats problem ive got now can u just unscrew the bottom screw or does the whole lot need to come off. Done the backs in minutes tho.

Edited by Hall1979, 21 October 2017 - 09:33 AM.

[JayRS3]

Yes thats problem ive got now can u just unscrew the bottom screw or does the whole lot need to come off. Done the backs in minutes tho.

The wiring is normally held in place with plastic clips so you may be able to get your hand up there to pull one out but sometimes it’s easier just to take the card off as it’ll more than likely save you time overall.

[Hall1979]

The wiring is normally held in place with plastic clips so you may be able to get your hand up there to pull one out but sometimes it’s easier just to take the card off as it’ll more than likely save you time overall.

Cool will try it tomorrow when ive got more time nice one. 👍

[Hall1979]

Hi Guys,

This really is doing my head in ive finally put the puddle lights in without removal of the door card. Now my question is guys does the RS3 light display differ from the front as one goes one way and the back goes the other way if that helps cheers.

Ryan

[JayRS3]

Rotate the lenses

[Hall1979]

Rotate the lenses

Yes cheers dude just worked it out, lol
What nightmare lol never again ha ha

[Hall1979]

Finally done!!! 👍

[SteveHealy71]

My car don’t have the puddle lights as standard will the wiring still be there to fit these?

Edited by SteveHealy71, 06 November 2019 - 09:42 AM.